|Minimum Order Quantity||100 Kilogram|
|Application Method||Brush, Electrophoresis|
|Form of Paint||Liquid, Powder, Aerosol|
we are manufacturer, exporter and supplier of thermoplastic road marking paint in Hyderabad ( India ).Thermoplastic road marking paint specifications Features:Hazards Identification
Inhalation: Excessive inhalation can cause nausea, headache, intoxication.
Ingestion:May cause irritation to the digestive tract and mouth causing vomiting and abdominal pain
Skin Contact: Prolonged contact will affect and dry the skin and may lead to irritation and dermatitis.
Eye Contact: Will cause intense smarting and irritationFirst-aid Measures
Inhalation: Remove to fresh air. Give oxygen / artificial respiration if needed. Consult Doctor.
Ingestion: Do not induce vomiting. Give plenty of water. Consult Doctor.
Skin Contact: Remove contaminated clothing. Apply proprietary skin cleaner,
then wash with copious soap and water. Apply skin cream. Accidental Release Measures / Spills and Leaks
Steps to be taken in case material is NA
released or spilledHandling Storage
Precautions for safe handling: Keep in tightly closed container in cool dry
area from all sources of ignition
Other precautions: Store away from oxidizing agents,
peroxides, Food stuffs Exposure Controls / Personal Protection
Respiratory Protection (Type)
If engineering controls are not effective in
controlling airborne exposure
then respiratory protective equipment
should be used suitable for protecting
against airborne contaminants. Final
choice of appropriate breathing
protection is dependent upon actual
airborne concentrations and the type of
breathing protection required will vary
according to individual circumstances.
Expert advice may be required to make
Local Exhaust: Ensure adequate ventilation to comply with
Protective Gloves: Rubber, PVC
Eye Protection: Safety glasses with side shields or face
shield as appropriate recommended.Physical Chemical Properties
Appearance: White / Yellow
Odour: Odour of Petrolium resin
pH : N/A
Melting Point/Melting range °C: 180 - 210 OC
Specific Gravity: 1.36 + 0.05
Vapour pressure(MM mercury : N/A
Softening Point: 102 + 9.5
Water Solubility :Insoluble
Flash Point °C : 270 OC
Lower Explosive limits: N/A
Upper Explosive limits: N/A Stability Reactivity
Stability: Stable under normal conditions
Conditions to avoid: Heat, flames and other ignition sources.
Incompatibility/Materials to avoid: Oxidizing agents, strong acids, alkalis,
Hazardous Decomposition Products: Produces Oxides of carbon
Hazardous Polymerization: Will not occurToxicological Information
Inhalation Harmful: possible risk of irreversible effects through inhalation after single
exposure. Inhalation of product vapours may cause irritation of the nose,
throat and respiratory system.
Ingestion Harmful: possible risk of irreversible effects if swallowed after a single
Skin Harmful: possible risk of irreversible effects in contact with skin after a
single exposure. May cause redness, itching and irritation.
Eye May cause eye irritation, tearing, stinging, blurred vision, and redness
Chronic Effects Harmful: possible risk of irreversible effects through inhalation, in
contact with skin and if swallowed. Disposal Consideration
Dispose in accordance with all local and governmental regulations
- Item Code: YNM-ThermoplasticRoadMarkingPaint
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: Hyderabad
- Delivery Time: Ready Stocks